Operations & complianceEffluent standards and the process train they imply
Reading the GB 18918-2002 grades as a design instruction — what each limit demands of the process, and where reuse and export standards change the answer.
Operations & complianceCommissioning and operating a packaged plant
What arrives pre-tested and what does not, the order commissioning runs in, how the biology is started, and what a daily and weekly round has to look at.
Operations & complianceHospital and clinic wastewater: what is different
Why a small flow carries a heavy duty, and how pathogens, ammonia, contrast media and disinfectants change the process a hospital plant has to run.
Operations & complianceCoagulation and flocculation: dosage and the jar test
What coagulation and flocculation each do, the three chemical families, why the dose cannot be read from a table, and the jar test that sets it.
Operations & complianceAeration blowers in wastewater treatment: maintenance and the electricity bill
What the aeration blower has to do, the maintenance that prevents failures, and the checks that turn the largest electricity line on a biological plant into a number somebody manages.
Operations & complianceWhat is an IPAL? Indonesia’s domestic wastewater limits explained
IPAL is Indonesia’s term for a wastewater treatment plant. Under Permen LH No. 11/2025, the limit depends on the discharge route and, for discharge to water media, the daily wastewater volume.
Operations & complianceNOM-001-SEMARNAT-2021: what Mexico limits in a discharge
What the current Mexican discharge standard covers, the limits by receiving body, what changed from the 1996 edition, and when each block took effect.
Operations & complianceNOM-002-SEMARNAT-1996: limits before the sewer
What the Mexican sewer-discharge standard limits, the full parameter table, pH and temperature, the sampling schedule, and the dates each municipality had to comply.
Operations & complianceNOM-003-SEMARNAT-1997: quality for reused water
What the Mexican reuse standard requires of treated water used in public services, the difference between direct and indirect contact, and the sampling regime behind the numbers.
Operations & compliancePhilippines effluent standards: DAO 2016-08 and the 2021 update
How the Philippines sets effluent limits by water body class, what DAO 2021-19 changed for six parameters, and the rules for strong wastewater and monitoring relief.
Operations & complianceResolución 0631 de 2015: Colombia discharge limits explained
How the Colombian discharge standard picks a limit: four load tiers for domestic wastewater, the Article 15 default for industry, and the 1.50 relief for sewer discharges.
Operations & complianceWastewater discharge limits compared: Mexico, the Philippines and Colombia
Three national instruments that ask three different questions before giving a number: the receiving body, the water body class, or the activity and its load.
Operations & complianceSaudi wastewater discharge limits: coastal water, surface water and land
Saudi Arabia’s aqueous-media regulation uses different tables for coastal and marine water, surface water, and soil or land. The averaging period is part of every limit.
Operations & complianceThailand building effluent standards 2024: the ก, ข, ค and ง classes
Thailand replaced its 2005 building effluent notice in 2024. Two notices published the same day do two different jobs: one sets the limits and the classes, the other designates which buildings are controlled.
