Medical Waste Incinerator Emission Standards by Country

Medical waste incinerator limits depend on the waste, plant size, location and permit. This guide explains how to read a standard and hands over to a separate country lookup for the numerical tables; it does not replace the permit or a current-law check. Sources checked: 17 November 2026.

Threaded instrument bosses and cable conduits on the grey flue-gas ducting of an incinerator
Incineration & flue gas
On this page

Which medical waste incinerators this guide covers

This page covers incinerators built to burn medical waste: infectious and sharps, pathological, pharmaceutical and cytotoxic waste. Those are not one permit class: a unit permitted for infectious waste is not thereby permitted for cytotoxic waste, and a pharmaceutical stream can carry a different furnace condition and limits. Confirm four things first: the waste categories the permit covers, the operator (generator or licensed treatment operator), the capacity and duty cycle, and whether the project is new, modified or existing.

Municipal solid waste, general industrial waste, animal-carcass and crematorium incinerators sit outside this page. Non-combustion treatment, such as autoclaving or microwave disinfection, is also outside it. Where a country applies a general incineration standard to medical waste, its entry in the country lookup says so.

How to read a standard before comparing it

A limit is a number plus the conditions that give it meaning. Read them in this order:

  • Jurisdiction and instrument: the country and the instrument the permit cites.
  • Waste categories: infectious, pathological, pharmaceutical and cytotoxic waste may be permitted separately.
  • Operator and plant type: generator-owned or licensed treatment facility; new, modified or existing.
  • Reference oxygen and standard state: the O₂ reference, temperature, pressure, and whether the result is dry or wet.
  • Averaging period: daily mean, 30-minute mean, hourly value or one campaign.
  • Units and dioxin scheme: mg/m³ or mg/Nm³, ppm, and I-TEQ or another TEQ scheme.

The country index below links to the separate lookup, which sets out selected values in each instrument's own terms. It is not a complete permit table: many instruments also limit SO₂, HF, metals, TOC or opacity, set monitoring frequencies and let authorities tighten conditions. Design against the permit, not this page.

Country standards index

Each link opens the corresponding jurisdiction entry in the separate lookup. The notes describe applicability only; numerical limits, reference conditions and monitoring detail are in the lookup.

European Union — Waste-incineration baseline under IED Annex VI; member-state permits and BAT conclusions may be stricter.

United Kingdom — England and Wales IED baseline under Schedule 13; Scotland and Northern Ireland have separate regimes. Small waste incineration plants also require a permit.

Indonesia — Healthcare-waste incineration under P.56/2015; generator-owned and licensed treatment facilities have different combustion duties.

Vietnam — Medical-waste rows of QCVN 19:2024, selected by capacity and zone; furnace rules are in QCVN 30:2025, with separate transition provisions.

Thailand — Infectious-waste incinerators under the MNRE 2003 notification; the permit sets monitoring and additional conditions.

Malaysia — General waste-incineration standard; medical projects also need the relevant scheduled-waste approvals.

South Africa — Thermal-treatment subcategory 8.1, new-plant reference; the atmospheric emission licence governs the project.

Mexico — NOM-098-SEMARNAT-2002 for waste incineration including biological-infectious waste, subject to permitting.

Brazil — CONAMA 316/2002 medical-waste scope; the environmental licence may tighten values, and the crematorium table does not apply.

Saudi Arabia — Air Quality Executive Regulations category 21 for hazardous and medical-waste incinerators at the stated construction cut-off; measurement conditions differ by row.

Egypt — Version-specific: Decree 710/2012 Annex 6 Table 21 is the verified text, not confirmation of the complete current medical-waste schedule; check later amendments and licensing with EEAA.

India — Bio-Medical Waste Management Rules 2016 Schedule II, read with the amendments and the facility authorisation; in-house incineration is restricted.

China — GB 39707-2020 Table 4 for dedicated medical-waste facilities; local standards and permits may be stricter.

United States — 40 CFR Part 60 Subpart Ec Table 1B for HMIWI at the stated construction or modification cut-offs; existing units use other rules.

New Zealand — Consent pathway: check whether the activity can be authorised before selecting equipment. Some incinerator uses are prohibited without resource consent, and a numerical limit cannot authorise a prohibited activity; confirm waste classification and regional requirements with the consent authority.

Selection and evidence handover

An operating temperature alone does not demonstrate emission compliance. Specify combustion and flue-gas treatment against the project permit, then verify the installed plant through the required monitoring and stack tests. This guide is not a compliance declaration for any equipment model.

For a compliance answer we need: country and issuing authority; waste categories, including cytotoxic and pharmaceutical waste; capacity in kg/h and hours per day; and the permit or emission conditions already issued.

A stack test report should identify the operating condition and load, each pollutant, the reference basis, the sampling method and the averaging time. An oxygen correction alone can be calculated as:

C_target = C_source × (21 − O₂ target) / (21 − O₂ source)

This calculation changes only the oxygen reference. Temperature, pressure, moisture, averaging period and TEQ scheme must also agree before two concentrations can be compared.

The range is on the incinerator pages, the treatment train in flue gas treatment for an incinerator, continuous monitoring in CEMS on a medical waste incinerator, and the contact form reaches the engineering desk.

Tell us what the site has to treat.

Contact details
Waste incineration