What is published today
The look-up charts and all eight live calculators, including sludge volume and dry solids, are published, and every figure carries its evidence level. Each calculator applies the same figures as its chart or calculation basis; the rest of the programme follows.
Sewage flow calculator
Served population and a per-capita allowance to average daily flow in m³/day, m³/h and L/s, with the four-band look-up table on the page.
DAF sizing calculator
Design flow, application and influent solids to the dissolved air flotation area, the air demand and the smallest model in each published series that covers the flow.
Incinerator capacity selector
Daily waste, the seasonal margin and the hours the unit runs to the kg/h rating it has to meet, and the smallest published CXMWI or CXWSL model that covers it.
Hydraulic retention time calculator
Flow and retention time to tank volume in either direction, with the ground area at your own depth and the three published bands side by side.
Peaking factor calculator
Average daily flow to the Kz factor and peak flow in three units, with a population estimate entry point.
Container loading calculator
Packed unit dimensions and weight to units per container for 20GP, 40GP and 40HC, with the binding source, the volume ceiling where the 40HC payload is set by the carrier and CSC plate and confirmed per booking, and the containers a batch needs.
Effluent process train selector
A discharge grade to the process train that normally delivers it, or permit limits to the grades they satisfy, with a first-round anaerobic and anoxic tank volume.
Sludge volume and dry solids calculator
Wet-sludge volume or dry solids, your density and wet-basis percentage to wet mass, dry solids and volume in either direction.
The seven sizing charts
Population to capacity, peaking factor, container loading, influent quality, effluent standards, tank volume and incinerator emissions.
Plant selection and sizing guide
How the charts are used together, from design flow to process train.
Dissolved air flotation units
The CXCF, CXQF and CXPF series, with the capacities we publish for each.
Incinerators
Medical, municipal, industrial and small-scale incinerators, with their capacity bands.
How the calculators will work
Runs in the browser
No account and no upload: the inputs stay on your device and the arithmetic runs in the page.
Same figures as the chart
A calculator takes its values from a published chart and carries the same evidence level; it does not add new numbers.
The table stays on the page
The full look-up table is part of the page, so it can be read and cited with JavaScript turned off.
