Process & biologyMBR vs MBBR vs SBR: choosing a process
MBR, MBBR and SBR compared on footprint, effluent quality, energy, operation and the flow range each one suits.
Process & biologyWhat the zones of an A²/O plant remove
The anaerobic, anoxic and aerobic zones each hold a different set of conditions, and the order they sit in is what makes nitrogen and phosphorus leave the water.
Process & biologyActivated sludge process: diagram and four design decisions
How the activated sludge process works, with a flow diagram, six steps, design formulas and a worked example linking sludge age, F/M, return sludge and tank volume.
Process & biologyGrit removal in wastewater treatment: why it sits in front
What grit is, what it costs when it is not taken out, and how a grit chamber in a wastewater treatment plant is sized for the flow it has to handle.
Process & biologyMembrane fouling: four mechanisms and what each one needs
Cake layer, pore blocking, organic adsorption and inorganic scaling: how each one forms, and why the shape of the transmembrane pressure curve names the mechanism that is running.
Process & biologyMembrane cleaning: the chemicals, and how frequency is set
Maintenance and recovery cleaning, the three chemical families — hypochlorite, acid and alkali — and why the interval between cleans follows the transmembrane pressure trend and not the calendar.
Process & biologyMLSS and MLVSS in wastewater: what the two numbers count
What an MLSS wastewater reading includes, what the volatile fraction adds, how the sample is taken, and what the ratio between the two numbers says about the biology.
Process & biologyCOD vs BOD: what the ratio tells you about treatability
What the COD and BOD tests each measure, why the BOD to COD ratio is read as a first estimate of biodegradability, and the cases in which the ratio misleads.
Process & biologyF/M ratio and sludge age: the two dials of an activated sludge plant
How the food to microorganism ratio and the sludge age describe one balance from two sides, how each dial is actually turned, and what going too far in either direction looks like.
Process & biologyFenton oxidation: when the reaction is worth its cost
The reagent bill, the iron sludge it leaves and the point at which a chemical stage beats the alternatives — read as a cost question rather than a chemistry one.
Process & biologyExtended aeration process: 20–30 day sludge age, 18–36 h retention
What the extended aeration process does differently, why the long sludge age is the design intent rather than a side effect, and where it stops paying. The design numbers are a 20–30 day sludge age and 18–36 hours of retention.
Process & biologySlaughterhouse wastewater: the pre-treatment before the biological stage
Blood, fat, hair, paunch and ammonia: what a slaughterhouse discharges, which of it has to come out before the biology, and what the biological stage should be handed.
Process & biologyInternal and external recycle ratios: how each one is set
The two recycle lines in an activated sludge plant carry the same name and do different jobs. How each ratio is derived from a figure you can measure, and what running it too hard looks like.
